This is an old revision of the document!
fsiinst.cfg
This is an example config file for the fsiinst installation:
fsienv=LAB # fsi environment fsidb=fsidb # fsi db name fsiusr=fsiusr # fsi db user fsipw=fsipw21! # fsi db userpassword pgmain=9 # fixed entry for configuration for this fsi version pgsub=4 # fixed entry for configuration for this fsi version pgpkgnr=2 # fixed entry for configuration for this fsi version fsisrv=$HOSTNAME backuplink="/mnt/bak" # optional a link for the backup (default = /opt/fsi/backup) ha_create="yes" # optional create HA export on fsi deploy server (default = no) ha_export_dir="/var/shares/nfs4ha" # directory to export for HA update="no" # run yum update at the end of the installation (default = yes) debug="debug" # message output level (info/debug/trace) of fsiinst script during installation / update of fsi server trace="yes" # enable trace mode on fsi server (default no) for portal, daemon and installations rsyslog[1]='cron.* @172.16.0.5' # Rsyslog additional config in /etc/rsyslog.d/fsi.conf rsyslog[2]='*.* @172.19.2.16 # udp (standard for syslog)' rsyslog[3]='*.* @@172.19.2.17 # tcp' dhcpd=yes # install dhcpd dhcpd_net=( 172.16.23.0 # dhcpd supported networks 172.16.99.128 172.16.5 172.16.98.136 172.16.0.0 172.16.4.0 172.16.97.0 172.16.96.136 169.254.0.0 172.16.3.0 ) dhcpd_nm=( 255.255.255.0 # override found or default nm 255.255.255.128 # /25 /26 # 255.255.255.192 255.255.255.248 255.255.0.0 255.555.255.0 # wrong netmask - 23 ) dhcpd_gw=( # option routers: default gateway is the first server ip in the network 250 # default ip in network - # - search for ip gw on fsi or takte default - /25 .129 (first server in subnet in example net 172.16.99.128) 172.16.5.3 - 300.16.0.1 172.16.5.1 f # first ip in ip segment l # last ip in segment l20 # last - 20 ) dhcpd_range_start=( # dhcpd range in above net start (default = 100) 100 - 140 f f100 # first + 100 l10 # last - 10 ) dhcpd_range_end=( # range end (default = 200) 200 210 - f200 # first + 100 l # last l20 # last - 20 +20 # start dhcp ip + 10 ips ) default_nextsrv=172.16.0.60 # Override default nextsrv dhcpd_nextsrv=( # if not given = take the fsi ip on this network 10.100.11.10 # next server for the above net - # default ip from fsi deploy server on this network 172.16.5.1 ) default_pxefile=pxelinux.0 # Override default load file for all networks dhcpd_pxefile=( # default = pxelinux.0 if not exist pxelinux.0 # optional other boot file - default pxelinux.0 - # use default nixfile.5 *dkfasjöasdf ) default_nis=lab.local dhcpd_nis=( # option nis-domain e.g. "lab.schnuerle.com" - lab.schnuerle.com schnuerle.com ) default_domain=lab.schnuerle.com dhcpd_domain=( # option domain-name e.g. "lab.local" - added to client name for fqdn lab.local - schnuerle.com ) default_dns=172.16.0.8 # Override default dns server for all networks dhcpd_dns=( # option domain-name-servers e.g. 172.16.0.4,172.16.2.1 - 172.16.0.4 172.16.0.4,172.16.2.1 - - ) default_timeoff=-36000 # Override default time offset dhcpd_timeoff=( # option time-offset e.g. -18000 for Eastern Standard Time -18000 ) default_ntp=172.16.0.5 # Override default ntp-servers for all networks dhcpd_ntp=( # option ntp-servers e.g. 172.16.0.3 172.16.0.3 - ) default_lease=3600 # Override default lease time dhcpd_lease=( # default-lease-time e.g. 600 - 3600 600 ) default_maxlease=36000 # Override fault default max lease time dhcpd_maxlease=( # max-lease-time e.g. 7200 7200 ) cmds[0]='yum -y localinstall http://$HOSTNAME/repos/epel/epel-release-latest-${osmain}.noarch.rpm' # additional commands before rpm installation (e.g. to install additional repos) cmds[1]='/bin/sed -i "/^#baseurl.*/ s/download.fedoraproject.org\/pub/$HOSTNAME\/repos/" "/etc/yum.repos.d/epel.repo"' cmds[2]='/bin/sed -i "/^#baseurl.*/ s/#baseurl/baseurl/" "/etc/yum.repos.d/epel.repo"' cmds[3]='/bin/sed -i "s/metalink/#metalink/" "/etc/yum.repos.d/epel.repo"' inst_rpm=( # install additional rpms mlocate htop config-machine-kerberos ) symbefore["/mnt"]="/tmp/mnt-symlinks" # create symlink before fsi installation starts symafter["/mnt/general/rhel/mirror"]="/opt/fsi/repos/redhat" # symlink create after fsi installation before install additional rpms symafter["/mnt/general/epel/mirror"]="/opt/fsi/repos/epel"